A1 Roofing Reading

At A1 Roofing Reading, we understand the importance of a secure and weather-tight roof verge system. A dry verge system is a popular choice for many homeowners in Reading, as it provides a maintenance-free and efficient way to finish the roof verge. In this article, we will guide you through the process of fitting a dry verge system to an existing roof in Reading.

A dry verge system is a type of roof verge system that uses a combination of plastic or metal components to secure the roof tiles at the verge (the edge of the roof where the tiles meet the gable end). Unlike traditional mortar-based verge systems, dry verge systems do not require mortar and are therefore less prone to cracking and water ingress.

• Dry verge system components (available at most roofing suppliers)
• Roofing screws
• Tiles (if replacing existing tiles)
• Batten (if replacing existing batten)
• Measuring tape
• Safety gear (hard hat, gloves, etc.)

1. Remove Existing Verge System: Before installing the new dry verge system, you will need to remove the existing verge system. This may involve removing mortar, old verge tiles, and any other debris. Take care not to damage the underlying roof structure.
2. Measure the Verge: Measure the length of the verge to determine how many dry verge units you will need. Make sure to measure from the eaves (the lower edge of the roof) to the top of the verge.
3. Cut the Batten: Cut the batten to the required length, ensuring it is even with the top of the verge.
4. Fit the Undercloak: Fit the undercloak to the batten, ensuring it is securely screwed in place.
5. Fit the Dry Verge System: Begin fitting the dry verge system, starting from the eaves and working your way up. Each unit should be screwed to the batten, ensuring they are evenly spaced and securely fixed.
6. Fit the End Closure: Fit the end closure to the top of the verge, ensuring it is securely screwed in place.
7. Render the Verge (Optional): If desired, render the verge to provide additional protection and a smooth finish.

• Always follow the manufacturer's instructions for the specific dry verge system you are using.
• Ensure the roof tiles are securely fixed to the batten before fitting the dry verge system.
• Use a spirit level to ensure the verge is even and plumb.
• Consider consulting a professional roofer if you are unsure about any aspect of the installation.

For a visual guide on how to fit a dry verge system, watch this video tutorial: https://www.youtube.com/watch?v=CHCXZPvWMKKT
At A1 Roofing Reading, we have over 30 years of experience in roofing services, including dry verge system installations. If you are unsure about fitting a dry verge system to your existing roof in Reading, contact us today to discuss your options. Call us on 0118 449 2361 to speak to one of our experienced roofers.