A1 Roofing Reading

At Precision Roofing and Building, trading as A1 Roofing Reading, we specialize in providing top-notch roofing services, including fibreglass roofing, to homeowners and business owners in Reading and the surrounding areas. In this article, we will guide you through the process of fibreglassing a roof, highlighting the essential steps and materials required.

Before starting the fibreglassing process, ensure that the roof decking is secure, dry, and free from any debris or old roofing materials. If necessary, replace any rotten or damaged decking to ensure a stable base for the fibreglass laminate.

Install trims and edging around the perimeter of the roof, ensuring a secure and watertight seal. This will prevent water from seeping under the fibreglass laminate and causing damage.

Mix the fibreglass resin with the catalyst, following the manufacturer's instructions. The typical mix ratio is 2:1 (resin:catalyst). Ensure the mixture is well combined and free from any air pockets.

Use a roller to apply the resin mixture to the roof decking, ensuring an even coat. Apply the resin to the entire roof surface, working in sections to maintain a consistent finish.

Cut the fibreglass mat to size, leaving a 50mm overlap between sheets. Apply the mat to the resin-coated decking, ensuring it is smooth and even. Use a roller to remove any air pockets or wrinkles.

Apply a topcoat of resin to the fibreglass mat, ensuring a smooth and even finish. Use a roller to spread the resin, working in sections to maintain a consistent finish.

Install trims and edging around the perimeter of the roof, ensuring a secure and watertight seal. Apply a final coat of resin to the trims, ensuring a smooth and even finish.